1. Getsov L.B. Materials and strength of gas turbines: in 2 books. Rybinsk: Gas turbine technologies, 2010, book 1, 605 p.
2. Getsov L.B. Materials and strength of gas turbines: in 2 books. Rybinsk: Gas turbine technologies, 2011, books 2, 493 p.
3. Logunov A.V. Heat-resistant nickel alloys for shoulder blades and disks of gas turbines. Rybinsk: Gas turbine technologies, 2017, 854 p.
4. Superplanes II. Heat-resistant materials for aerospace and industrial power plants: in 2 book. Eds. Ch.T. Sims, N.S. Stoloff, U.K. Hagel; Moscow: Metallurgiya, 1995, book 2, 384 p.
5. Kablov E.N. Materials of the new generation – the basis of innovation of technological leadership and national security of Russia // Intellekt i tekhnologii, 2016, no. 2 (14), pp. 16–21.
6. Bazyleva O.A., Ospennikova O.G., Arginbaeva E.G., Letnikova E.Yu., Shestakov A.V. Development trends of nickel-based intermetallic alloys. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 104–115. DOI: 10.18577/2071-9140-2017-0-S-104-115.
7. Kablov E.N. Materials and technologies of the VIAM for the "Aviator" // Permskiye aviatsionnye dvigateli, 2014, no. 31, pp. 43–47.
8. Gromov V.I., Yakusheva N.A., Vostrikov A.V., Cherkashneva N.N. High strength structural steels for gas-turbine engine shafts (review). Aviation materials and technology, 2021, no. 1 (62), paper no. 01. Available at: http://www.journal.viam.ru (accessed: December 06, 2022). DOI: 10.18577/2713-0193-2021-0-1-3-12.
9. Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030». Aviacionnye materialy i tehnologii, 2015, no. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
10. Foundry of a nickel-based heat-resistant alloy and a product made from it: pat. RU 2633679 C1; appl. 20.12.16; publ. 16.10.17.
11. Gorbovets M.A., Hodinev I.A., Ryzhkov P.V. Low-cycle fatigue at high temperatures of heat-resistant nickel-based alloy manufactured by selective laser melting. Aviacionnye materialy i tehnologii, 2019, no. 4 (57), pp. 65–73. DOI: 10.18577/2071-9140-2019-0-4-65-73.
12. Gorbovets M.A., Khodinev I.A., Monin S.A. Influence of average cycle stress on characteristics of low-cycle fatigue of high-temperature nickel alloy VZh175. Aviation materials and technologies, 2023, no. 1 (70), paper no. 10. Available at: http://www.journal.viam.ru (accessed: April 07, 2023). DOI: 10.18577/2713-0193-2023-0-1-126-136.
13. Casting shoulder blades of gas turbine engines: alloys, technologies, coating. 2nd ed. Ed. E.N. Kablov. Moscow: Nauka, 2006, 632 p.
14. Sidorov V.V., Kablov D.E., Rigin V.E. Metallurgy of foundry heat-resistant alloys: technology and equipment. Moscow: VIAM, 2016, 368 p.
15. State Standard 10145–81. Metals. The method of testing long-term strength. Moscow: Publishing house of standards, 1981, 9 p.
16. State Standard 3248–81. Metals. The testing method for creep. Moscow: Publishing house of standards, 1981, 11 p.
17. State Standard 25.502–79. Methods of mechanical testing of metals. Fatigue test methods. Moscow: Publishing house of standards, 1986, 25 p.
18. Solovyev A.E., Golynets S.A., Khvatsky K.K., Aslanyan I.R. Performing of static tensile tests on Zwick/Roell machines. Trudy VIAM, 2015, no. 8, paper no. 12. Available at: http://viam-works.ru (accessed: December 05, 2022).
19. Shkolnik L.M. Forest test methodology: reference. Moscow: Metallurgiya, 1978, 304 p.
20. Svetlov I.L., Petrushin N.V., Epishin A.I., Karashaew M.M., Elyutin E.S. Single crystals of nickel-based superalloys alloyed with rhenium and ruthenium (review). Part 1. Aviation materials and technologies, 2023, no. 1 (70), paper no. 03. Available at: http://www.journal.viam.ru (accessed: April 04, 2023). DOI: 10.18577/2713-0193-2023-0-1-30-50.
21. Reed R.C. The Superalloys. Fundamentals and Applications. Cambridge: United Kingdom at University Press. 2006, 372 p.
22. Kovpak V.I. Prediction of heat resistance of metal materials. Kyiv: Naukova Dumka, 1981, 240 p.
23. Kablov E.N., Golubovsky E.R. The heat resistance of nickel alloys. Moscow: Mechanical Engineering, 1998, 463 p.
24. Donachie M.J., Donachie S.J. Selection of superalloys for design // Mechanical Engineers Handbook. Third Ed. John Wiley & Sons, Inc, 2006, pp. 287–334.
25. Du B., Yang J., Cui C., Sun X. Effects of grain size on the high-cycle fatigue behavior of IN792 superalloy // Materials & Design, 2015, vol. 65, pp. 57‒64. DOI: 10.1016/j.matdes.2014.08.059.
26. Gorbovets M.A., Khodinev I.A., Karanov V.A., Yushin V.D. Influence of the type of loading on high-cycle fatigue of heat-resistant alloys. Trudy VIAM, 2019, no. 3 (75), paper no. 11. Available at: http://www.viam-works.ru (accessed: December 06, 2022). DOI: 10.18577/2307-6046-2019-0-3-96-104.
27. Collins J. Damage to materials in structures. Analysis, prediction, prevention. Moscow: Mir, 1984, 624 p.

1. History of aviation materials science. VIAM – 80 years: years and people. Ed. E.N. Kablov. Moscow: VIAM, 2012, 520 p.
2. Kablov E.N. Improving the performance of cast blades of gas turbine engines from heat-resistant nickel alloys by controlling the process of structure formation during crystallization: thesis, Dr. Sc. (Tech.). Moscow: MGATU im. K.E. Tsiolkovsky, 1995, 60 p
3. Cast blades of gas turbine engines: alloys, technologies, coatings. Ed. E.N. Kablov. 2nd ed. Moscow: Nauka, 2006, 632 p.
4. Narsky A.R., Deinega G.I., Kuzmina I.G. The use of a modifier - cobalt aluminate in the casting of blades of gas turbine engines. Part 1. Liteynoye proizvodstvo, 2022, no. 3, pp. 15–19.
5. Narsky A.R., Deinega G.I., Kuzmina I.G. Obtaining a fine–grained structure of castings from nickel superalloys using a cobalt aluminate modifier. Aviation materials and technologies, 2023, no. 3 (72), paper no. 01. Available at: http://www.journal.viam.ru. DOI: 10.18577/2713-0193-2023-0-3-3-14.
6. Lost wax casting. Eds. Ya.I. Shklennik, V.A. Ozerov. 3Rd ed. Moscow: Mashinostroenie, 1984, 408 p.
7. Ospennikova O.G., Kablov E.N., Shunkin V.N. Development and research of a plasticizer for model compositions based on natural waxes. Aviation materials and technologies, 2002, no. 3, pp. 68–70.
8. Ospennikova O.G. Research and working out of parametres of technological process of manufacturing of models from modelling compositions on the basis of synthetic waxes. Aviacionnye materialy i tehnologii, 2014, no. 3, pp. 18–21. DOI: 10.18577/2071-9140-2014-0-3-18-21.
9. Aslanyan I.R., Rassokhina L.I., Ospennikova O.G. Definition of quantitative factors, significantly influencing on technological characteristics of model compositions). Trudy VIAM, 2018, no. 12 (72), paper no. 01. Available at: http://www.viam-works.ru (accessed: May 14, 2023). DOI: 10.18577/2307-6046-2018-0-12-3-13.
10. Ospennikova O.G. Influence research of fillers on properties and stability of modelling compositions, a choice of optimum structures. Aviacionnye materialy i tehnologii, 2014, no. 3, pp. 14–17. DOI: 10.18577/2071-9140-2014-0-3-14-17.
11. Bondarenko Yu.A. Trends in the development of high-temperature metal materials and technologies in the production of modern aircraft gas turbine engines. Aviacionnye materialy i tehnologii, 2019, no. 2 (55), pp. 3–11. DOI: 10.18577/2071-9140-2019-0-2-3-11.
12. Toloraya V.N., Ostroukhova G.A. Studying of the mechanism of origin of monocrystals from Re-Ru-containing nickel heat resisting alloys with the set spatial crystallographic orientation from Ni–W–Re–C system primings with a temperature likvidusa 1550–1600 °C. Voprosy materialovedeniya, 2023 (in print).
13. Toloraya V.N., Ostroukhova G.A. Obtaining single-crystal seeds [001] from alloys of the Ni–W system by the method of directed crystallization. Voprosy materialovedeniya, 2021, no. 2 (106), pp. 55–65.
14. Visik E.M., Gerasimov V.V., Kolyadov E.V., Kuzmina N.A. Influence of technological modes of casting on the parameters of the structure of single crystals of new heat-resistant alloys. Metallurgiya mashinostroyeniya, 2016, no. 5, pp. 27–31.
15. Kuzmina N.A. Growth structural defects in single crystals of nickel heat-resistant alloys. Aviation materials and technologies, 2022, no. 3 (68), paper no. 02. Available at: http://www.journal.viam.ru (accessed: May 22, 2023). DOI: 10.18577/2713-0193-2022-0-3-15-26.
16. Sokolov A.V., Deynega G.I., Kuzmina N.A., Kuzmina I.G. Structural and mechanical properties of a composite material based on partially stabilized zirconium dioxide doped with magnesium aluminate spinel. Aviation materials and technologies, 2021, no. 3 (64), paper no. 07. Available at: http://www.journal.viam.ru (accessed: May 18, 2023). DOI: 10.18577/2713-0193-2021-0-3-78-85.
17. Folomeikin Yu.I., Kablov E.N., Demonis I.M. Highly refractory ceramic rods and molds for casting blades by directional crystallization. Aviatsionnye materialy i tekhnologii, 2003, no. 1, pp. 33–44.
18. Rassokhina L.I., Bityutskaya O.N., Gamazina M.V., Avdeev V.V. Research of compositions of ceramic rods based on fused quartz and their manufacturing technology. Trudy VIAM, 2021, no. 1 (95), paper no. 04. Available at: http://www.viam-works.ru (accessed: May 14, 2023). DOI: 10.18577/2307-6046-2021-0-1-34-42.
19. Rassokhina L.I., Bityutskaya O.N., Gamazina M.V., Avdeev V.V. Investigation of the main characteristics of ceramic rods based on fused quartz for the manufacture of castings for aircraft engine blades. Liteynoye proizvodstvo, 2022, no. 10, pp. 26–30.
20. Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030». Aviacionnye materialy i tehnologii, 2015, no. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.

1. Kablov E.N. Trends and guidelines for Russia's innovative development. 3rd ed., rev. and add. Moscow: VIAM, 2015, 720 p.
2. Kablov E.N. What is the future to be made of? Materials of a new generation, technologies for their creation and processing – the basis of innovation. Krylya Rodiny, 2016, no. 5, рр. 8–18.
3. Kablov E.N. What is innovation. Nauka i zhizn, 2011, no. 5, pp. 2–6.
4. Demakov S.T., Gadeev D.V., Illarionov A.G., Ivasishin O.M. Effect of heat treatment in the structure and fracture behavior of titanium alloy VST5553. Metal Science and Heat Treatment, 2015, vol. 57, no. 7–8, pp. 473–479.
5. Kablov E.N., Putyrsky S.V., Yakovlev A.L., Krokhina V.A., Naprienko S.A. Investigation of resistance to fatigue failure of forgings from high-strength titanium alloy VT22M, manufactured with final deformation in (α + β)- and β-regions. Titan, 2021, no. 1 (70), pp. 473–479. DOI: 10.1007/s11041-015-9907-1.
6. Glazunov S.G., Moiseev V.N. Structural titanium alloys. Moscow: Metallurgiya, 1974, 368 p.
7. Horev A.I. Fundamental and applied works on structural titanium alloys and perspective directions of their development. Trudy VIAM, 2013, no. 2, paper no. 04. Available at: http://www.viam-works.ru (accessed: December 15, 2022).
8. Anoshkin N.F., Bochvar G.A., Livanov V.A. Titanium alloys. Metallography of titanium alloys. Moscow: Metallurgiya, 1980, 464 p
9. Peters M., Kumpfert J., Ward C.H., Leyens C. Titanium Alloys for Aerospace Applications. Advanced Engineering Materials, 2003, vol. 5, pp. 419–427.
10. Tetyukhin V.V., Levin I.V., Leder M.O., Shibanov A.S. Development of a new high-strength alloy: Ti 5Al–5Mo–5V–3Cr. Sovremennye nauchnyye problemy i tekhnologii v grazhdanskoy aviatsii, Moscow: Nauka, 2013, pp.. 240–251.
11. Krokhina V.A., Putyrsky S.V., Yakovlev A.L., Nochovnaya N.A. Prospects for the use of β-deformation for a high-strength titanium alloy of the transition class VT22M. Titan, 2019, no. 3 (65), pp. 42–47.
12. Inagaki I., Shirai Y., Takechi T., Ariyasu N. Application and Features of Titanium for the Aerospace Industry. Osaka: Nippon Steel & Sumitomo Metal, 2014, pp. 22–27.
13. Kablov E.N., Nochovnaya N.A., Shiryaev A.A., Davydova E.A. Investigation of structural and phase transformations in metastable β-titanium alloys and effect of cooling rate from homogenization temperature on structure and properties of VT47 alloy. Part 2. Trudy VIAM, 2020, no. 8 (90), paper no. 02. Available at: http://www.viam-works.ru (accessed: December 08, 2022). 10.18577/2307-6046-2020-0-8-11-19.
14. Dzunovich D.A., Panin P.V., Lukina E.A., Shiryaev A.A. Heat treatment effect on structure and properties of welded large-dimensioned semi-finished products from VT23 titanium alloy. Trudy VIAM, 2018, no. 1 (61), paper no. 07. Available at: http://www.viam-works.ru (accessed: June 20, 2022). DOI: 10.18577/2307-6046-2018-0-1-7-7.
15. Kalashnikov V.S., Reshetilo L.P., Chuchman O.V., Naprienko S.A. Strength and reliability of rods and rotor blade stamps made of heat-resistant industrial titanium alloys and modern pseudo-α-titanium alloy. Trudy VIAM, 2022, no. 2 (108), paper no. 02. Available at: http://www.viam-works.ru (accessed: December 08, 2022). DOI: 10.18577/2307-6046-2022-0-2-13-31.
16. Nochovnaya N.A., Shiryaev A.A. Effect of heat treatment on mechanical properties and structure of high-strength metastable β-titanium alloy with experimental composition. Trudy VIAM, 2018, no. 6 (66), paper no. 03. Available at: http://www.viam-works.ru (accessed: December 13, 2022). DOI: 10.18577/2307-6046-2018-0-6-22-29.
17. Panin P.V., Nochovnaya N.A., Kablov D.E., Alekseev E.B., Shiryaev A.A., Novak A.V. A practical guide to the metallography of alloys based on titanium and its intermetallic compounds: textbook. allowance. Ed. E.N. Kablov. Moscow: VIAM, 2020, 200 p.
18. Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030». Aviacionnye materialy i tehnologii, 2015, no. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
19. Kablov E.N. VIAM: continuation of the path. Nauka v Rossii, 2012, no. 4, pp. 7–11.

1. Dzunovich D.A., Lukina E.A., Yakovlev A.L. Influence of heat treatment parameters on producibility and mechanical properties of sheets made from high-strength titanium alloy VT23. Aviacionnye materialy i tehnologii, 2018, no. 3 (52), pp. 3–10. DOI: 10.18577/2071-9140-2018-0-3-3-10.
2. Moiseev V.N. Beta-titan alloys and prospects for their development. Metallovedeniye i termicheskaya obrabotka metallov, 1998, no. 12, pp. 11–14.
3. Bania P.J. Beta Titanium Alloys and Their Role in the Titanium Industry// JOM, 1994, no. 7, pp. 16–19.
4. Belogur V.P. Elastic elements of titanium alloys. Pruzhiny, 2016, no. 1, pp. 12–14
5. Shaboldo O.P., Vitorsky Y.M., Karashtin E.A. et al. Spring materials with special properties from hard to and formed highly alloyed, thermomechanically strengthened alloys based on titanium, nickel and niobium. Metalloobrabotka, 2011, no. 2 (62), pp. 28–35.
6. Nyakana S.L., Fanning J.C., Boyer R.R. Quick Reference Guide for β Titanium Alloys in the 00s. Journal of Materials Engineering and Performance, 2005, vol. 14 (6), pp. 799–811.
7. Boyer R.R., Briggs R.D. The Use of β Titanium Alloys in the Aerospace Industry. Journal of Materials Engineering and Performance, 2005, vol. 14 (6), pp. 681–685.
8. Duyunova V.A., Putyrskiy S.V., Arislanov A.A., Krokhina V.A., Shiryaev A.A. Analysis of the effect of heat treatment on the structure and mechanical proper-ties of bars made of VT47 titanium alloy. Aviation materials and technologies, 2021, no. 4 (65), paper no. 03. Available at: http://www.journal.viam.ru (accessed: April 15, 2023). DOI: 10.18577/2713-0193-2021-0-4-26-34.
9. Dzunovich D.A., Alekseyev E.B., Panin P.V., Lukina E.A., Novak A.V. Structure and properties of sheet semi-finished products from various wrought intermetallic titanium alloys. Aviacionnye materialy i tehnologii, 2018, no. 2 (51), pp. 17–25. DOI: 10.18577/2071-9140-2018-0-2-17-25.
10. Kablov E.N. New Generation Materials and Technologies for Their Digital Processing. Herald of the Russian Academy of Sciences, 2020, vol. 90, no. 2, pp. 225–228.
11. Shchetinina N.D., Rudchenko A.S., Selivanov A.A. The approaches that are used for developed of optimal strain modes of aluminum-lithium alloys (review). Trudy VIAM, 2020, no. 8 (90), paper no. 03. Available at: http://www.viam-works.ru (accessed: April 04, 2023). DOI: 10.18577/2307-6046-2020-0-8-20-34.
12. Titanium alloys. Metallography of titanium alloys. Ed. N.F. Anoshkin, A.F. Belov, S.G. Glazunov, V.I. Slutkin. Moscow: Metallurgiya, 1980, 464 p.
13. Lyasotskaya V.S. Thermal processing of welded joints of titanium alloys. Moscow: Ekomet, 2003. 352 p.
14. Ilyin A.A., Kolachev B.A., Polkin I.S. Titanium alloys. Composition, structure, properties: reference. Moscow: VILS; MATI, 2009, 520 p.
15. Titanium and titanium alloys. Fundamentals and applications. Ed. C. Leyens, Peters M. Wiley–VCH, 2003, 513 p.
16. Kolli R.P., Devaraj A. A review of metastable beta titanium alloys. Metals, 2018, vol. 8, pp. 1–41.
17. Lütjering G., Williams J.C. Titanium. Engineering Materials Processes. Second ed. Springer Berlin, Heidelberg, 2007, 442 p.
18. Weiss I., Semiatin S.L. Thermomechanical processing of beta titanium alloys – an overview. Material Science and Engineering: A, 1998, vol. 243, pp. 46–65.
19. Ilyin A.A. The mechanism and kinetics of phase and structural transformations in titanium alloys. Moscow: Nauka, 1994, 304 p.
20. Boyer R. Aerospace applications of beta titanium alloys. JOM, 1994, no. 6, pp. 20–23.
21. Cotton J.D., Briggs R.D., Boyer R.R. et al. State of the Art in Beta Titanium Alloys for Airframe Applications. JOM, 2015, vol. 67, no. 6, pp. 1281–1303.
22. Zhao X., Niinomi M., Nakai M., Hieda J. Effect of Deformation-Induced ω Phase on the Mechanical Properties of Metastable β-Type Ti–V Alloys. Materials Transactions, 2012, vol. 53, no. 8, pp. 1379–1384.
23. Panin P.V., Nochovnaya N.A., Kablov D.E., Alekseev E.B., Shiryaev A.A., Novak A.V. Practical guide for metallography of alloys based on titanium and its intermetallids: textbook. Ed. E.N. Kablov. Moscow: VIAM, 2020, 200 p.
24. Donachie M.J. Titanium: A Technical Guide. 2nd ed. ASM International: Materials Park, OH, USA. 2000, 367 p.
25. Kablov E.N., Nochovnaya N.A., Shiryaev A.A., Davydova E.A. Investigation of structural and phase transformations in metastable β-titanium alloys and effect of cooling rate from homogenization temperature on structure and properties of VT47 alloy. Part 1. Trudy VIAM, 2020, no. 6–7 (89), paper no. 01. Available at: http://www.viam-works.ru (accessed: April 15, 2023). DOI: 10.18577/2307-6046-2020-67-3-10.
26. Chen W., Yu G., Li K. et al. Plastic instability in Ti‒6Cr‒5Mo‒5V‒4Al metastable β-Ti alloy containing the β-spinodal decomposition structures. Materials Science & Engineering A, 2021, vol. 811, art. 141052. DOI: 10.1016/j.msea.2021.141052.
27. Bania P.A., Lenning G.A., Hall J.A. Development and Properties of Ti–15V–3Cr–3Sn–3Al (Ti15-3). Beta Titanium Alloys in the 80’s. Eds. R.R. Boyer, H.W. Rosenberg. TMS Warrendale, PA, 1984, pp. 209–228.
28. Schmidt P., El-Chaikh A., Christ H.-J. Effect of Duplex Aging on the Initiation and Propagation of Fatigue Cracks in the Solute-rich Metastable β Titanium Alloy Ti 38-644. Metallurgical and Materials Transactions A, 2011, vol. 42A, pp. 2652–2667.
29. Zhanga Y., Xianga S., Tana Y.B., Jia X.M. Study on ω-assisted α nucleation behavior of metastable β-Ti alloys from phase transformation mechanism. Journal of Alloys and Compounds, 2021, vol. 890, art. 161686. DOI: 10.1016/j.jallcom.2021.161686.
30. Poulose P.K., Imam M.A. The effect of microstructure on tensile properties and fracture toughness of Ti-15-3 Alloy. Titanium ‘95: Science and Technology. Eds. P.A. Blenkinsop, W.J. Evans, H.M. Flower. London: Institute of Metals, 1996, pp. 988–995.
31. Shiryaev A.A., Nochovnaya N.A. Increasing the characteristics of the fatigue of the pseudo-β-titan alloy VT47 by improving the regime of strengthening heat treatment. New materials and technologies for deep processing of raw materials-the basis of innovative development of the Russian economy: Materials of the III Intern. Sci.-tech. Conf. M.: NRC «Kurchatov Institute» – VIAM, 2022, pp. 411–429.
32. Boyer R.R., Rack H.J., Venkatesh V. The influence of thermomechanical processing on the smooth fatigue properties of Ti–15V–3Cr–3Al–3Sn. Materials Science and Engineering A, 1998, vol. 243, pp. 97–102.
33. Yumak N., Aslantas K. Effect of Heat Treatment Procedure on Mechanical Properties of Ti‒15V‒3Al‒3Sn‒3Cr Metastable β Titanium Alloy. Journal of Materials Engineering and Performance, 2021, vol. 30, pp. 1066–1074.
34. Mantri S.A., Choudhuri D., Alam T. et al. Tuning the scale of α precipitates in β-titanium alloys for achieving high strength. Scripta Materialia, 2018, vol. 154, pp. 139–144.
35. Gao J., Rainforth W.M. The Effect of Heating Rate on Discontinuous Grain Boundary Alpha Formation in a Metastable Beta Titanium Alloy. Metallurgical and Materials Transactions A, 2020, vol. 51A, pp. 3766–3771.
36. Furuhara T., Maki T., Makino T. Microstructure control by thermomechanical processing in β-Ti-15-3 alloy. Journal of Materials Processing Technology, 2001, vol. 117, pp. 318–323.
37. Markovsky P.E., Ikeda M. Balancing of mechanical properties of Ti‒4.5Fe‒7.2Cr‒3.0Al using thermomechanical processing and rapid heat treatment. Materials Transactions, 2005, vol. 46, no. 7, pp. 1515–1524.
38. Furuhara T. Role of Defects on Microstructure Development of Beta Titanium Alloys. Metals and materials, 2000, vol. 6, no. 3, pp. 221–224.
39. Okada M. Strengthening of Ti‒15V‒3Cr‒3Sn‒3Al by Thermo-mechanical Treatments. ISIJ International, 1991, vol. 31, no. 8, pp. 834–839.
40. Suzuki T., Niwa N., Goto K., Kobayashi M., Moroyama T., Takatori H. Effect of aging on mechanical properties of beta titanium alloys of Ti‒13V‒11Cr‒3Al, Ti‒15V‒3Cr‒3Sn‒3Al and Ti‒3Al‒8V‒6Cr‒4Mo‒4Zr. Titanium ‘95: Science and Technology. London: Institute of Metals, 1996, pp. 1294–1301.
41. Nochovnaya N.A., Shiryaev A.A., Davydova E.A. Influence of manufacturing parameters on pseudo-β-titanium alloy VT47 sheet structural state and mechanical property anisotropy. Metallurgist, 2023, vol. 66, no. 9–10, pp. 1216–1224.
42. Zhua W., Tanb C., Xiaoa R., Suna Q., Sun J. Slip behavior of Bi-modal structure in a metastable titanium alloy during tensile deformation. Journal of Materials Science & Technology, 2020, vol. 57, pp. 188–196.
43. Putyrskiy S.V., Yakovlev A.L., Nochovnaya N.A., Krokhina V.A. Research of different heat treatment modes influence on properties of semi-finished products and welded joints from titanium alloy ВТ22М. Aviacionnye materialy i tehnologii, 2019, no. 1 (54), pp. 3–10. DOI: 10.18577/2071-9140-2019-0-1-3-10.
44. Krokhina V.A., Putyrskiy S.V., Gribkov M.S. Analysis of structure and mechanical properties of welded joint from titanium alloy VT22M. Aviation materials and technologies, 2022, no. 2 (67), paper no. 05. Available at: http://www.journal.viam.ru (accessed: April 15, 2023). DOI: 10.18577/2713-0193-2022-0-2-52-62.
45. Basak K. The role of crystallographic relationships between alpha(α) and beta(β) phases on the elevated temperature isothermal phase transformation kinetics in Timetal LCB (Ti‒6.5Mo‒4.5Fe‒1.5Al), 2008. Available at: https://tigerprints.clemson.edu/all_theses/429 (accessed: April 15, 2023).
46. Jha S.K., Ravichandran K.S. High-cycle fatigue resistance in beta-titanium alloys. JOM, 2000, no. 3, pp. 30–35.
47. Miyano N., Norimura T., Inaba T., Ameyama K. Reasons for Formation of Triangular Precipitates in Ti–15V–3Cr–3Sn–3Al Titanium Alloy. Materials Transactions, 2006, vol. 47, no. 2, pp. 341–347.
48. Dehghan-Manshadi A., Dippenaar R.J. Development of α-phase morphologies during low temperature isothermal heat treatment of a Ti–5Al–5Mo–5V–3Cr alloy. Materials Science and Engineering A, 2011, vol. 528, pp. 1833–1839.
49. Wang S., Chen L., Chen XB. et al. Effect of aging treatment on microstructure and tensile properties of Ti‒4Al‒6Mo‒2V‒5Cr‒2Zr. Journal of materials research and technology, 2023, vol. 22, pp. 2008–2016.
50. Zhu W., Lei J., Tan C. et al. A novel high-strength β-Ti alloy with hierarchical distribution of α-phase: The superior combination of strength and ductility. Materials and Design, 2019, vol. 168, pp. 1–8.
51. Zhu W., Kou W., Tan C. et al. Face centered cubic substructure and improved tensile property in a novel β titanium alloy Ti–5Al–4Zr–10Mo–3Cr. Materials Science & Engineering A, 2020, vol. 771, art. 138611. DOI: 10.1016/j.msea.2019.138611.

1. Kablov E.N., Putyrsky S.V., Yakovlev A.L., Krokhina V.A., Naprienko S.A. Investigation of resistance to fatigue failure of forgings from high-strength titanium alloy VT22M, manufactured with final deformation in (α + β)- and β-regions. Titan, 2021, no. 1 (70), pp. 26–33.
2. Kablov E.N., Ospennikova O.G., Lomberg B.S. Complex innovative technology of isothermal punching on air in mode of superplasticity of disks from superhot strength alloys. Aviacionnye materialy i tehnologii, 2012, no. S, pp. 129–141.
3. Kablov E.N., Bakradze M.M., Gromov V.I., Voznesenskaya N.M., Yakusheva N.A. New high strength structural and corrosion-resistant steels for aerospace equipment developed by FSUE «VIAM» (review). Aviacionnye materialy i tehnologii, 2020, no. 1 (58), pp. 3–11. DOI: 10.18577/2071-9140-2020-0-1-3-11.
4. Nochovnaya N.A., Shiryaev A.A., Sharapkin D.S. Complex of mechanical and operational properties of rolled blanks from metastable-β-titanium alloy VT47. Aviation materials and technologies, 2022, no. 3 (68), paper no. 05. Available at: http://www.journal.viam.ru (accessed: May 16, 2023). DOI: 10.18577/2713-0193-2022-0-3-50-59.
5. Ponomarenko D.A., Skugorev A.V., Sidorov S.A., Shpagin A.S. Influence of heat exchange between workpiece and die on forming process of aerospace parts by special isothermal presses). Trudy VIAM, 2016, no. 10, paper no. 3. Available at: http://www.viam-works.ru (accessed: May 12, 2023). DOI: 10.18577/2307-6046-2016-0-10-3-3.
6. Razuvaev E.I., Moiseev N.V., Kapitanenko D.V., Bubnov M.V. Modern technologies of plastic working of metals. Trudy VIAM, 2015, no. 2, paper no. 03. Available at: http://www.viam-works.ru (accessed: May 12, 2023). DOI: 10.18577/2307-6046-2015-0-2-3-3.
7. Putyrskij S.V., Arislanov A.A., Artemenko N.I., Yakovlev A.L. Different methods of wear resistance increase of titanium alloys and comparative analysis of their efficiency for VT23M titanium alloy. Aviacionnye materialy i tehnologii, 2018, no. 1, pp. 19–24. DOI: 10.18577/2071-9240-2018-0-1-19-24.
8. Moiseev N.V., Razuvaev E.I. Formation of a recrystallized structure in deformed semi-finished products from titanium alloys of a transitional class, obtained by isothermal stamping. Metallovedeniye i termicheskaya obrabotka metallov, 2002, no. 7, pp. 43–47.
9. Egorova Yu.B., Davydenko L.V., Belova S.B., Chibisova E.V. Prediction of the mechanical properties of forgings from titanium alloys VT6 and VT3-1 depending on the chemical composition and structure. Izvestiya vuzov. Tsvetnaya metallurgiya, 2018, no. 1, pp. 12–21.
10. Burgonova O.Yu., Pantyukhova K.N., Belozerova E.P. Determination of the rational mode of heat treatment of the VT3-1 alloy to increase plasticity before pressure treatment. Omskiy nauchnyy vestnik, 2017, no. 3 (153), pp. 44–48.
11. Skugorev A.V., Kapitanenko D.V., Shishkov S.Yu., Melnikova D.A. Formation of the structure and mechanical properties of high-alloy titanium alloys during isothermal forging in air. Titan, 2021, no. 3 (72), pp. 34–40.
12. Golovkin S.A., Pervov M.L., Vozdvizhenskaya M.V., Skobeleva A.S. Isothermal stamping of precision blanks of gas turbine engine blades for dimensionless processing of the airfoil profile. Zagotovitelnye proizvodstva v mashinostroyenii (kuznechno-pressovoye, liteynoye i drugiye proizvodstva), 2016, no. 10, pp. 24–27.
13. Yakovlev A.L., Arislanov A.A., Putyrsky S.V., Nochovnaya N.A. Study of mechanical properties and structure of large-sized semi-finished products made of VT6ch titanium alloy. Aviacionnye materialy i tehnologii, 2020, no. 4 (61), pp. 12–18. DOI: 10.18577/2071-9140-2020-0-4-12-18.
14. Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030». Aviacionnye materialy i tehnologii, 2015, no. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
15. Dzunovich D.A., Lukina E.A., Yakovlev A.L. Influence of heat treatment parameters on producibility and mechanical properties of sheets made from high-strength titanium alloy VT23. Aviacionnye materialy i tehnologii, 2018, no. 3 (52), pp. 3–10. DOI: 10.18577/2071-9140-2018-0-3-3-10.
16. Putyrskiy S.V., Yakovlev A.L., Nochovnaya N.A., Krokhina V.A. Research of different heat treatment modes influence on properties of semi-finished products and welded joints from titanium alloy ВТ22М. Aviacionnye materialy i tehnologii, 2019, no. 1 (54), pp. 3–10. DOI: 10.18577/2071-9140-2019-0-1-3-10.

1. Zagora A.G., Tkachuk A.I., Terekhov I.V., Mukhametov R.R. Methods of chemical modification of epoxy oligomers (review). Trudy VIAM, 2021, no. 7 (101), paper no. 08. Available at: http://www.viam-works.ru (accessed: June 06, 2023). DOI: 10.18577/2307-6046-2021-0-7-73-85.
2. Bao L.-R., Yee A.F. Effect of temperature on moisture absorption in a bismaleimide resin and its carbon fiber composites. Polymer, 2002, vol. 43, pp. 3987–3997.
3. Mukhametov R.R., Petrova A.P. Thermosetting binders for polymer composites (review). Aviacionnye materialy i tehnologii, 2019, no. 3 (56), pp. 48–58. DOI: 10.18577/2071-9140-2019-0-3-48-58.
4. Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030». Aviacionnye materialy i tehnologii, 2015, no. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
5. Shosheva A.L. Bismaleimide resins (review). Part 1. Trudy VIAM, 2022, no. 10 (116), paper no. 03. Available at: http://www.viam-works.ru (accessed: December 15, 2022). DOI: 10.18577/2307-6046-2022-0-10-23-41.
6. Radue M.S., Varshney V., Baur J.W. et al. Molecular Modeling of Cross-Linked Polymers with Complex Cure Pathways: A Case Study of Bismaleimide Resins. Macromolecules, 2018, vol. 51, pp. 1830–1840.
7. Yi X.-S., Du S., Zhang L. Composite materials engineering. Chemical Industry Press, 2006, vol. 1. Fundamentals of Composite Materials, 765 p.
8. Bismaleimide-epoxy compositions and prepregs: pat. 4510272 USA 475836; appl. 16.03.83, publ. 09.04.85.
9. Iredale R.J., Ward C., Hameron I. Modern Advances in Bismaleimide Resin Technology: a 21st Century Perspective on the Chemistry of Addition Polyimides. Progress in Polymer Science, 2017, vol. 6, pp. 1–21.
10. Musto P., Martuscelli E., Ragosta G., Russo P., Scarinzi G., Villano P. FTIR spectroscopy and physical properties of an epoxy/Bismaleimide IPN system. Journal of Materials Science, 1998, vol. 33, p. 4595.
11. Musto P. Two-Dimensional FTIR Spectrodcopt Dtudies on the Thermal-Oxidative Degradation of Epoxy-Bis(maleimide) Networks. Macromolecules, 2003, vol. 36, p. 3210.
12. Woo E.M., Chen L.B., Seferis J.C. Characterization of epoxy-bismaleimide network matrices. Journal of Materials Science, 1987, vol. 22, p. 3665.
13. Kim D.S., Han M.J., Lee J.R. Cure behavior and Properties of an Epoxy resin Modified With a Bismaleimide Resin. Polymer engineering and science, 1995, vol. 35, no. 17, pp. 1353–1358.
14. Patel K.D. Novel Bismaleimide-epoxy resin system. Oriental Journal of Chemistry, 1999, vol. 15(3), pp. 457–462.
15. Wu C.-S., Liu Y.-L., Hsu K.-Y. Maleimide-epoxy resins: preparation, thermal properties, and flame retardance. Polymer, 2003, no. 44, pp. 565–573.
16. Heat resistant resin compositions, articles and method: pat. US 531498A; appl. 05.02.93; publ. 24.05.94.
17. Thermo-appropriate composition: pat. 2201947 Rus. Federation; appl. 17.05.01; publ. 10.04.03.
18. Jena R.K., Yue C.Y., Sk M.M., Ghosh K. A novel high performance bismaleimide/diallyl bisphenol A (BMI/DBA) – epoxy interpenetrating network resin for rigid riser application. RSC Advances, 2015, vol. 5, pp. 79888–79897.
19. Zhang Q., Wang J., Yang S. et al. Facile construction of one-component intrinsic flame-retardant epoxy resin system with fast curing ability using imidazole-blocked bismaleimide. Composite Part B, 2019, vol. 177, p. 107380.
20. Mahesh K.P.O., Alagar M. Preparation and Characterization of Chain-Extended Bismaleimide Modified Polyurethane–Epoxy Matrices. Journal of Applied Polymer Science, 2002, vol. 87, pp. 1562–1568.
21. Tkachuk A.I., Donetsky K.I., Terekhov I.V., Karavaev R.Yu. The use of thermosetting matrices for the manufacture of polymer composite materials by the non-autoclave molding methods. Aviation materials and technology, 2021, no. 1 (62), paper no. 03. Available at: https://journal.viam.ru (accessed: June 07, 2023). DOI: 10.18577/2713-0193-2021-0-1-22-33.
22. Kablov E.N., Erofeev V.T., Zotkina M.M. et al. Plasticized epoxy composites for manufacturing of composite reinforcement. Journal of Physics. Conference Series: International Conference on Engineering Systems 2020, 2020, p. 012031.
23. Modified epoxy resin film for RFI molding process and preparation method thereof: pat. 101735573 CN; appl. 12.03.09; publ. 30.05.12.
24. Heat-resistant epoxy binder for the manufacture of products by pressure impregnation: pat. 2590563 Rus. Federation; appl. 23.04.15; publ. 10.07.16.
25. Kablov E.N., Chursova L.V., Babin A.N., Mukhametov R.R., Panina N.N. Developments of FSUE "VIAM" in the field of melt binders for polymer composite materials. Polimernye materialy i tekhnologii, 2016, vol. 2, no. 2, pp. 37–42.
26. Composition of epoxybismaleimide binder for prepregs (options), method for producing epoxybismaleimide binder (options), prepreg and product: pat. 2335514 Rus. Federation; appl. 27.12.06; publ. 10.10.08.
27. Composition of epoxybismaleimide binder for prepregs, prepreg and product: pat. 2427598 Rus. Federation; appl. 29.10.09; publ. 10.05.11.
28. Composition of epoxybismaleimide resin and method for its production: pat. 2587169 Rus. Federation; appl. 15.12.14; publ. 20.06.16.
29. Mosiyuk V.N., Vorvul S.V., Tomchani O.V. Differential vacuum molding as an advanced technology of vacuum molding. Aviacionnye materialy i tehnologii, 2017, no. 4 (49), pp. 37–41. DOI: 10.18577/2071-9140-2017-0-4-37-41.
30. azhenov S.L., Berlin A.A., Kulkov A.A., Oshmyan V.G. Polymer composite materials. Strength and technology. Dolgoprudny: Intelligence, 2010, 352 p.
31. Method for manufacturing composite shaping equipment for molding products from polymer composite materials: pat. 2720312 Rus. Federation; appl. 10.07.19; publ. 28.04.20.
32. Kotukhova A.M., Ivanitsky A.S., Boyko L.I., Tomchani O.V., Dolmatov S.A. Heat-resistant epoxyimide binder for composite materials. Plasticheskie massy, 2006, no. 8, pp. 9–12.
33. Ragjasekaran R., Alagar M. Mechanical Properties of Bismaleimides Modified Polysulfone Epoxy Matrices. International Journal of Polymeric Materials, 2007, vol. 56, pp. 911–927.
34. Method for Preparing Modified Bismaleimide Resin Adhesive Film: pat. 104177828A CN; appl. 30.07.14; publ. 03.12.14.
35. Epoxy adhesive: pat. 25202479 Rus. Federation; appl. 10.12.12; publ. 27.06.14.
36. Hysol EA 9673 Modified BMI Film Adhesive. Available at: https://www.lookpolymers.com (accessed: May 18, 2023).
37. LOCTITE EA 9673 AERO Epoxy Film Adhesive (known as Hysol EA 9673). Available at: http://aero-consultants.co.uk/uploads/article2398/LOCTITE%20EA%209673%20AERO.PDF (accessed: May 18, 2023).
38. Adhesive Composition, Laminate, and Adhesive Sheet: pat. 2020-012026 A; appl. 13.07.18; publ. 23.01.20.

1. Kablov E.N. New generation Materials and technologies for their digital Processing. Herald of the Russian Academy of Sciences, 2020, vol. 90, no. 2, pp. 225–228.
2. Kablov E.N., Valueva M.I., I.V. Zelenina, Khmelnitskiy V.V., Aleksashin V.M. Carbon plastics based on benzoxazine oligomers – perspective materials. Trudy VIAM, 2020, no. 1, paper no. 07. Available at: http://www.viam-works.ru (accessed: January 10, 2022). DOI: 10.18577/2307-6046-2020-0-1-68-77.
3. Kablov E.N., Startsev V.O. Systematical analysis of the climatics influence on mechanical properties of the polymer composite materials based on domestic and foreign sources (review).
Aviacionnye materialy i tehnologii, 2018, no. 2 (51), pp. 47–58. DOI: 10.18577/2071-9140-2018-0-2-47-58.
4. Centea T., Grunenfelder L.K., Nutt S.R. A review of out-of-autoclave prepregs – Material properties, process phenomena, and manufacturing considerations. Composites. Part A: Applied Science and Manufacturing, 2015, vol. 70, pp. 132–154.
5. Turner T.A., Harper L.T., Warrior N.A., Rudd C.D. Low-cost carbon-fibre-based automotive body panel systems: a performance and manufacturing cost comparison. Proceeding IMechE Part D: J. Automobile Engineering, 2006, vol. 222, pp. 53–63.
6. Murray J.J., Pappa E.J., Mamalis D. et al. Characterization of carbon fibre reinforced powder epoxy composites for wind energy blades. ECCM18 – 18th European Conference on Composite Materials, 2018, p. 8.
7. Mukhametov R.R., Petrova A.P. Thermosetting binders for polymer composites (review). Aviacionnye materialy i tehnologii, 2019, no. 3 (56), pp. 48–58. DOI: 10.18577/2071-9140-2019-0-3-48-58.
8. Kablov E.N., Laptev A.B., Prokopenko A.N., Gulyaev A.I. Relaxation of polymeric composite materials under the prolonged action of static load and climate (review). Part 1. Binders. Aviation materials and technologies, 2021, no. 4 (65), paper no. 08. Available at: http://www.journal.viam.ru (accessed: January 13, 2022). DOI: 10.18577/2071-9140-2021-0-4-70-80.
9. Edwards W.T., Martinez P., Nutt S.R. Process robustness and defect formation mechanisms in unidirectional semipreg. Advanced Manufacturing: Polymer & Composites Science, 2020, vol. 6 (4), pp. 198–211. DOI: https://doi.org/10.1080/20550340.
10. Ekuase O.A., Anjum N., Obiozo Eze V., Okoli O.I. A Review on the Out-of-Autoclave Process for Composite Manufacturing. Journal of Composites Science, 2022, no. 6 (6), vol. 172, pp. 1–30. DOI: 10.3390/jcs6060172.
11. Schechter S.G.K., Centea T., Nutt S.R. Polymer film dewetting for fabrication of out-of-autoclave prepreg with high throughthickness permeability. Composites Part A: Applied Science and Manufacturing, 2018, vol. 114, pp. 86–96. DOI: 10.1016/j.compositesa.2018.08.002.
12. Cender T.A., Simacek P., Davis S. et al. Gas evacuation from partially saturated woven fiber laminates. Transport in Porous Media, 2016, vol. 115, pp. 541–562. DOI: 10/1007/s11242-016-0784-x.
13. Schechter S.G.K., Grunenfelder L.K., Nutt S.R. Design and application of discontinuous resin distribution patterns for semipregs. Advanced Manufacturing: Polymer and Composites Science, 2020, vol. 6, pp. 72–85. DOI: 10.1080/20550340.2020.1736864.
14. Irving P.E., Soutis C. Polymer composites in the aerospace industry. Sawston, Cambridge: Woodhead Publishing, 2019, p. 536.
15. Martinez P., Jin B.C., Nutt S. Droplet Spreading on Unidirectional Fiber Beds. Journal of Composites Science, 2021, vol. 5, pp. 13. DOI: 10.3390/jcs5010013.
16. Tavares S.S., Michaud V., Månson J.A.E. Through thickness air permeability of prepregs during cure. Composites Part A, 2009, vol. 40, pp. 1587–1596. DOI: 10.1016/j.compositesa.2009.07.004.
17. Frost M., Solanki D., Mills A. Resin film infusion processing of carbon fibre composite automotive body panels. SAMPE Journal, 2003, vol. 39 (4), pp. 44–49.
18. Marsh G. Prepregs – raw material for high-performance composites. Reinforced plastics, 2002, vol. 46, no. 10, pp. 24–28. DOI: 10.1016/S0034-3617(02)80172-2.
19. Margueres P., Torres J.L., Perie J.N. et al. Combined approach for the characterization of composites manufactured by RFI and industrial application. Journal of composite materials, 2008, vol. 42 (2), pp. 189–209. DOI: 10.1177/0021998307086200.
20. Repecka L., Boyd J. Vacuum-bag-only-curable prepregs that produce void-free parts. Proceeding SAMPE 2002 conf. Long Beach, CA: Society for the Advancement of Material and Process Engineering, 2002, pp. 13.
21. Grunenfelder L.K., Centea T., Hubert P., Nutt S.R. Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg. Composites Part A: Applied Science and Manufacturing, 2013, vol. 45, pp. 119–126. DOI: 10.1016/j.compositesa.2012.10.001.
22. Grunenfelder L.K., Dills A., Centea T. et al. Effect of prepreg format on defect control in out-of-autoclave processing. Composites Part A: Applied Science and Manufacturing, 2017, vol. 93, pp. 88–99.
23. Resin composition, a fiber reinforced materials having a partially impregnated resin and composites made therefrom: pat. US6139942 A; appl. 06.02.97; publ. 31.10.00.
24. Manufacture of void-free laminates and use thereof: pat. US 6391436 B1; appl. 05.05.98; publ. 21.05.02.
25. Baumarda T., Menary G., De Almeida O. et al. Experimental characterization and modeling of the temperature and ratedependent shear behaviour of powder-impregnated glass fiber/PA66 woven semipregs. Composites Science and Technology, 2019, vol. 180, pp. 23–32. DOI: 10.1016/j.compscitech.2019.05.011.
26. Curable composition for advanced processes, and products made therefrom: pat. US 7709579 B2; appl. 05.08.04; publ. 04.05.10.
27. Semipreg, prepreg, resin composite material, and production methods thereof: pat. US 20200148846 A1; appl. 22.03.18; publ. 14.05.20.
28. Thermosetting polymers with improved thermal and oxidative stability for composite and adhesive application: pat. US 6313248 B1, appl. 13.11.96; publ. 06.11.01.
29. Semipreg material with a property-enhancing surface resin film for improved properties: pat. US6139942 A; appl. 06.02.97; publ. 31.10.00.
30. Ridgard C. Next generation out of autoclave systems. Proc. SAMPE 2010 conf. Seattle, 2010, pp. 1–18.
31. Epoxy resin composition for fiber reinforced composite material, prepreg, and fiber reinforced composite material: pat. US 9957387 B2; appl. 11.07.11; publ. 01.05.18.
32. Bender D.B., Centea T., Nutt S. Fast cure of stable semipregs via VBO cure. Advanced manufacturing: polymer & composites science, 2020, vol. 6, no. 4, pp. 245–255. DOI: 10.1080/20550340.2020.1869891.
33. Kratz J., Hsiao K., Fernlund G., Hubert P. Thermal models for MTM45-1 and Cycom 5320 out-of-autoclave prepreg resins. Journal of Composite Materials, 2013, vol. 47, no. 3, pp. 341–352. DOI: 10.1177/0021998312440131.
34. Schechter S.G.K., Centea T., Nutt S. Effects of resin distribution patterns on through-thickness air removal in vacuum-bag-only prepregs. Composites Part A: Applied Science and Manufacturing, 2020, vol. 130, pp. 105723. DOI: 10.1016/j.compositesa.2019.105723.
35. Takahashi N., Kageyama Y., Kawamura N. Research of multi-axial carbon fiber prepreg material for vehicle body. SAE 2011 World congress and exhibition, 2011, p. 6. DOI: 10.4271/2011/01/0216.
36. Tavares S.S., Michaud V., Manson J. Assessment of semi-impregnated fabrics in honeycomb sandwich structures. Composites Part A: Applied Science and Manufacturing, 2010, vol. 41, no. 1, pp. 8–15. DOI: 10.1016/j.compositesa.2009.09.005.
37. Composite materials: pat. US 8940381 B2; appl. 04.11.11; publ. 27.01.15.
38. Prepreg for manufacturing composite materials: pat. US 10016966 B2; appl. 17.01.13; publ. 10.07.18.
39. Prepreg for manufacturing composite materials: pat. GB 2516274 A; appl. 17.07.13; publ. 21.01.15.
40. Composite materials: pat. US 10118365 B2; appl. 06.06.17; publ. 06.11.18.
41. Composite materials: pat. GB 2485453 A; appl. 07.11.11; publ. 16.05.12.
42. Structured thermoplastic in composite interleaves: US 10065393 B2, appl. 15.10.15; publ. 04.09.18.
43. Notched prepreg substrate, laminated substrate, fiber-reinforced plastic, and method for manufacturing notched prepreg substrate: pat. JP 2008207544 A; appl. 24.01.08; publ. 11.09.08.
44. Curable prepregs with surface openings: pat. US 9802358 B2; appl. 20.12.13; publ. 31.10.17.
45. Grunenfelder L.K., Fisher C., Cabble C. et al. Defect Control in Out-of-Autoclave Manufacturing of Structural Elements. 44-th ISTC – Charleston SC. 2012, pp. 1.
46. Epoxy binders of the film type: pat. 2565177 Rus. Federation; appl. 25.09.14; publ. 20.10.15.
47. Epoxy binder, prepreg based on it and a product made from it: pat. 2587178, Rus. Federation; appl. 23.03.15; publ. 20.06.16.
48. Dushin M.I., Donetskiу K.I., Timoshkov P.N., Karavaev R.Yu. Research of process of out-of-autoclave formation semipregs on the basis of carbon fillers (rеview). Trudy VIAM, 2018, no. 9 (69), paper no. 03. Available at: http://www.viam-works.ru (accessed: January 13, 2022). DOI: 10.18577/2307-6046-2018-0-9-21-31.

1. Filippov A.A., Oleinikov E.P. History and prospects for the use of unmanned aerial vehicles. Reshetnev readings: Proceedings of the XXIII Intern. scientific-practical. Conf.: in 2 parts. Krasnoyarsk: SibGU M.F. Reshetnev, 2019, part 1, pp. 463–464.
2. Shevyrenkov M.Yu. Analysis of the world market for high-altitude unmanned aerial vehicles of long flight duration. Ekonomicheskiye strategii, 2016, no. 2, pp. 2–11.
3. Lenskikh A.N., Sergeev M.Yu., Uglyansky V.V. Tactical use of UAVs. Improving the defense capability of the state 2022: Materials of the correspondence scientific. St. Petersburg: Poltorak, 2022, pp. 160–165.
4. Zgirovskaya E.D. Unmanned aircraft. What the market is waiting for, and what the market is waiting for. Krylya Rodiny, 2020, no. 11–12, pp. 10–15.
5. Kostin A.S. Classification of civil unmanned aerial vehicles and their scope. System analysis and logistics, 2019, no. 1 (19), pp. 70–80.
6. A. V. Vytovtov, A. V. Kalach, and S. Yu. Modern unmanned aerial vehicles. Vestnik BSTU im. V.G. Shukhov, 2015, no. 4, pp. 70–74.
7. Evtodeva M.G., Tselitsky S.V. Unmanned aerial vehicles for military purposes: trends in development and production. Puti k miru i bezopasnosti, 2019, no. 2 (57), pp. 104–111.
8. Kuznetsov G.A., Kudryavtsev I.V., Krylov E.D. Retrospective analysis, current state and development trends of domestic unmanned aerial vehicles. Engineering Journal: Science and Innovations, 2018, no. 9 (81). Available at: http://www.engjournal.ru (accessed: January 17, 2023). DOI: 10.18698/2308-6033-2018-9-1801.
9. Yakovlev A.G., Baranov D.E. On the current state and trends in the use of new materials and technologies in the design of unmanned aerial vehicles. Vektor nauki TGU, 2014, no. 1, pp. 71–74.
10. Kablov E.N. Composites: today and tomorrow. Metally Evrazii, 2015, no. 1, pp. 36–39.
11. Doriomedov M.S. Russian and world market of polymer composites (review). Trudy VIAM, 2020, no. 6–7 (89), paper no. 04. Available at: http://www.viam-works.ru (accessed: January 18, 2023). DOI: 10.18577/2307-6046-2020-67-29-37.
12. Grashhenkov D.V., Chursova L.V. Strategy of development of composite and functional materials. Aviacionnye materialy i tehnologii, 2012, no. S, pp. 231–242.
13. Kolobkov A.S. Polymer composite materials for various aircraft structures (review). Trudy VIAM, 2020, no. 6–7 (89), paper no. 05. Available at: http://www.viam-works.ru (accessed: January 18, 2023). DOI: 10.18577/2307-6046-2020-0-67-38-44.
14. Larin S.N., Noakk N.V., Sokolov N.A. Competitive advantages of the Russian military-industrial complex and their implementation in import substitution strategies. Ekonomika i biznes: teoriya i praktika, 2019, no. 7, pp. 97–103. DOI: 10.24411/2411-0450-2019-11084.
15. Khrulkov A.V., Grigorev M.M., Yazvenko L.N. Implementation perspec-tives without autoclave technologies for manufacturing of constructional materials (review). Trudy VIAM, 2016, no. 2 (38), paper no. 06. Available at: http://www.viam-works.ru (accessed: January 18, 2023). DOI: 10.18577/2307-6046-2016-0-2-6-6.
16. Mishkin S.I. Application of carbon fiber plastics in constructions of pilotless devices (review). Trudy VIAM, 2022, no. 5 (111), paper no. 08. Available at: http://www.viam-works.ru (accessed: January 18, 2023). DOI: 10.18577/2307-6046-2022-0-5-87-95.
17. Zhu L., Li N., Childs P.R.N. Light-weighting in aerospace component and system design. Propulsion and Power Research. 2018, vol. 7, is. 2, pp. 103–119. DOI: 10.1016/j.jppr.2018.04.001.
18. Anand S., Mishra A.K. High-Performance Materials used for UAV Manufacturing: Classified Review. International Journal of All Research Education and Scientific Methods, 2022, is. 7, vol. 10, pp. 2811–2819.
19. Petrash V.Ya., Turkin I.K. Evaluation of the effectiveness of promising areas for the modernization of unmanned aerial vehicles. Trudy MAI, 2011, no. 49, art. 23. Available at: https://trudymai.ru (accessed: February 15, 2023).
20. Liang Y.-C., Chin P.-C., Sun Y.-P., Wang M.-R. Design and Manufacture of Composite Landing Gear for a Light Unmanned Aerial Vehicle. Applied Science, 2021, vol. 11, is. 2, art. 509. DOI: 10.3390/app11020509.
21. Araujo P.M.N., Costa T.R., Silva E.C. Design and manufacturing process of a UAV composite wing spar. 4th Brazilian Conference on Composite Materials. 2018. Available at: http://bccm4.com.br/proceedings/fullpapers/p067.pdf (accessed: February 15, 2023). DOI: 10.21452/bccm4.2018.09.06.
22. Patterson J.B., Grenestedt J.L. Manufacturing of a composite wing with internal structure in one cure cycle. Composite Structures, 2018, no. 206, pp. 601–609.
23. Unmanned aerial vehicle "Orion" Available at: https://kronshtadt.ru/products/bespilotnyij-kompleks-orion (accessed: February 13, 2023).
24. Belinis P.G., Donetskiy K.I., Lukyanenko Yu.V., Rogozhnikov V.N., Mayer Yu., Bystrikova D.V. Volume reinforcing solid-woven preforms for manufacturing of polymer composite materials (review). Aviacionnye materialy i tehnologii, 2019, no. 4 (57), pp. 18–26. DOI: 10.18577/2071-9140-2019-0-4-18-26.
25. Kakhanchik-Pilinoga E., Svistunova A., Luzan M., Bakaev A. Application of promising composite materials in unmanned aerial systems. Nauka i innovatsii, 2017, no. 6 (172), pp. 34–38.
26. ElFaham M.M., Mostafa A.M., Nasr G.M. Unmanned aerial vehicle (UAV) manufacturing materials: Synthesis, spectroscopic characterization and dynamic mechanical analysis (DMA). Journal of Molecular Structure, 2020, vol. 1201, art. 127211. DOI: 10.1016/j.molstruc.2019.127211.
27. Goh G.D., Agarwala S., Goh G.L., Dikshit V., Yeong W.Y. Additive manufacturing in unmanned aerial vehicles (UAVs): Challenges and potential. Aerospace Science and Technology, 2017, vol. 63, pp. 140–151. DOI: 10.1016/j.ast.2016.12.019.
28. Azarov A., Antonov F., Golubev M., Khaziev A., Ushanov S. Composite 3D printing for the small size unmanned aerial vehicle structure. Composites Part B, 2019, no. 169, рр. 157–163. DOI: 10.1016/j.compositesb.2019.03.073.
29. Grigorev M.M., Kogan D.I., Gusev Yu.A., Gurevich Ya.M. Features of producing composites by vacuum molding of prepreg. Aviacionnye materialy i tehnologii, 2014, no. 3, pp. 67–71. DOI: 10.18577/2071-9140-2014-0-3-67-71.
30. Veshkin Е.А., Satdinov R.A., Postnov V.I., Strelnikov S.V. Evaluation of effect of duration and storage condition on the properties of prepreg and PCM based on it. Trudy VIAM, 2017, no. 8, paper no. 10. Available at: http://www.viam-works.ru (accessed: March 01, 2023). DOI: 10.18577/2307-6046-2017-0-8-10-10.
31. Mukhametov R.R., Petrova A.P. Thermosetting binders for polymer composites (review). Aviacionnye materialy i tehnologii, 2019, no. 3 (56), pp. 48–58. DOI: 10.18577/2071-9140-2019-0-3-48-58.
32. Mosiyuk V.N., Tomchani O.V. Evaluation of properties of glass-fibre-reinforced plastics based on epoxybisma-leimide resin, produced by different non-autoclave molding techniques. Aviacionnye materialy i tehnologii, 2019, no. 2 (55), pp. 47–52. DOI: 10.18577/2071-9140-2019-0-2-47-52.
33. Kablov E.N. What is the future to be made of? Materials of a new generation, technologies for their creation and processing - the basis of innovation. Krylya Rodiny, 2016, no. 5, pp. 8–18.
34. Sidorina A.I. Multiaxial carbon fabrics in the products of aviation technology (review). Aviation materials and technologies, 2021, no. 3 (64), paper no. 10. Available at: http://www.journal.viam.ru (accessed: February 27, 2023). DOI: 10.18577/2713-0193-2021-0-3-105-116.
35. Kablov E.N. Without new materials, there is no future. Metallurg, 2013, no. 12, pp. 4–8.
36. Dementeva L.A., Serezhenkov A.A., Bocharova L.I., Lukina N.F., Kutsevich K.E., Petrova A.P. Properties of composite materials based on adhesive prepregs. Klei. Germetiki. Tekhnologii, 2012, no. 6, pp. 19–24.
37. Kutsevich K.E., Sidorina A.I., Tyumeneva T.Yu., Dement’eva L.A. Modern polymer composite materials based on adhesive prepregs. Khimicheskiye volokna, 2019, no. 5, pp. 32–37.
38. Starkov A.I., Kutsevich K.E., Tyumeneva T.Yu. Development of adhesive compositematerial based on UMT49S-12K-EP alternative carbon filler and VSK-14-3 adhesivebinder. Trudy VIAM, 2020, no. 6–7 (89), paper no. 07. Available at: http://www.viam-works.ru (accessed: March 16, 2023). DOI: 10.18577/2307-6046-2020-0-67-62-71.
39. Sathishkumar T.P., Satheeshkumar S., Naveen J. Glass fiber-reinforced polymer composites – a review. Journal of Reinforced Plastics and Composites, 2014, vol. 33 (13), pp. 1258–1275.
40. Davydova I.F., Kavun N.S. Fibreglasses ‒ multipurpose composite materials. Aviacionnye materialy i tehnologii, 2012, no. S, pp. 253–260.
41. Condruz M.R., Paraschiv A., Deutschlander A., Mîndru I. Assessment of GFRP Mechanical Properties in Order to Determinate Suitability for UAV Components. Key Engineering Materials, 2020, vol. 834, pp. 57–66.
42. Shivanagere A., Sharma S.K., Goyal P. Modelling of glass fibre reinforced polymer (GFRP) for aerospace applications. Journal of Engineering Science and Technology, 2018, vol. 13, no. 11, pp. 3710–3728.
43. Karabut V.V., Dudnik V.V., Samsonov I.K. Choice of parameters of the carrier system for a transport helicopter-type UAV. Izvestiya YUFU. Tekhnicheskiye nauki, 2019, no. 2, pp. 221–231. DOI: 10.23683/2311-3103-2019-2-221-231.
44. Ermachenkov D.I., Fazli T.G.K., Petrenko E.O. Development of a quadrocopter frame design for remote monitoring of objects. Naukovedenie, 2016, vol. 8, no. 6. Available at: http://naukovedenie.ru (accessed: March 24, 2023). DOI: 10.15862/45TVN616.
45. Khaliulin V.I., Sungatullin R.N., Batrakov V.V., Sakhbutdinova V.R. Study of the process of intensive molding of composite elements of an unmanned aerial vehicle. Vestnik KSTU im. A.N. Tupoleva, 2016, no. 1, pp. 67–71.
46. Kutsevich K.E., Dementeva L.A., Lukina N.F., Tyumeneva T.Yu. Adhesive prepregs as promising materials for parts and assemblies from polymeric composite materials. Aviacionnye materialy i tehnologii, 2017, no. S, pp. 379–387. DOI: 10.18577/2071-9140-2017-0-S-379-387.
47. Dementeva L.A., Serezhenkov A.A., Lukina N.F., Kutsevich K.E. Properties and appointment of composite materials based on adhesive prepregs. Trudy VIAM, 2014, no. 8, paper no. 06. Available at: http://www.viam-works.ru (accessed: April 04, 2023). DOI: 10.18577/2307-6046-2014-0-8-6-6.

1. Kosarev V.F., Alkhimov A.P. Technology, equipment, tools. Obrabotka metallov, 2003, no. 3, pp. 28–30.
2. Alkhimov A.P., Gulidov A.I., Kosarev V.F., Nesterovich N.I. Peculiarities of deformation of microparticles upon impact with a solid barrier. Prikladnaya mekhanika i tekhnicheskaya fizika, 2000, vol. 41, no. 1, pp. 204–209.
3. Alkhimov A.P., Klinkov S.V., Kosarev V.F., Fomin V.M. Cold gas-dynamic spraying. Theory and practice. Moscow: Fizmatlit, 2010, 536 p.
4. Alkhimov A.P., Kosarev V.F., Papyrin A.N. The method of "cold" gas-dynamic spraying. DAN SSSR, 1990, vol. 315, no. 5, pp. 1062–1065.
5. Peskova A.V., Bakradze M.M., Tikhonov M.M., Kuko I.S. Investigation of the influence of the oxide layer on the surface of particles metal-powder compositions of copper-chromium alloys on their technological properties. Trudy VIAM, 2023, no. 1 (119), paper no. 03. Available at: http://www.viam-works.ru (accessed: May, 18 2023). DOI: 10.18577/2307-6046-2023-0-1-28-38.
6. Kozlov I.A., Fomina M.A., Demin S.A., Benarieb I., Khmeleva K.M. Use of metal powder compositions to remove defects of parts from VAS-1 alloy by cold gas-dynamic spraying method. Trudy VIAM, 2022, no. 12 (118), paper no. 09. Available at: http://www.viam-works.ru (accessed: May 17, 2023). DOI: 10.18577/2307-6046-2022-0-12-96-106.
7. Khodykin L.G., Nyafkin A.N., Kosolapov D.V., Zhabin A.N. Laser welding of metal com-posite materials based on aluminium alloy reinforced with refractory particles SiC (review). Trudy VIAM, 2022, no. 12 (118), paper no. 06. Available at: http://www.viam-works.ru (accessed: April 05, 2023). DOI: 10.18577/2307-6046-2022-0-12-63-75.
8. Druzhnova Ya.S. Development of methods for thermal spraying of hardening tires based on tungsten and chromium carbides (review). Trudy VIAM, 2022, no. 10 (116), paper no. 09. Available at: http://www.viam-works.ru (accessed: April 05, 2023). DOI: 10.18577/2307-6046-2022-0-10-100-115.
9. Dykhuizen R.C., Smith M.F. Gas dynamic principles of cold spray. Journal of Thermal Spray Technology, 1998, vol. 7, no. 2, pp. 205–212.
10. Kablov E.N. Innovative developments of FSUE «VIAM» SSC of RF on realization of «Strategic directions of the development of materials and technologies of their processing for the period until 2030». Aviacionnye materialy i tehnologii, 2015, no. 1 (34), pp. 3–33. DOI: 10.18577/2071-9140-2015-0-1-3-33.
11. Kablov E.N., Startsev O.V. The basic and applied research in the field of corrosion and ageing of materials in natural environments (review). Aviacionnye materialy i tehnologii, 2015, no. 4 (37), pp. 38–52. DOI: 10.18577/2071-9140-2015-0-4-38-52.
12. Kablov E.N., Startsev O.V., Medvedev I.M. Review of international experience on corrosion and corrosion protection. Aviacionnye materialy i tehnologii, 2015, no. 2 (35), pp. 76–87. DOI: 10.18577/2071-9140-2015-0-2-76-87.
13. Kablov E.N., Kutyrev A.E., Vdovin A.I., Kozlov I.A., Afanasyev-Khodykin A.N. The research of possibility of galvanic corrosion in brazed connections used in aviation engine construction. Aviation materials and technologies, 2021, no. 4 (65), paper no. 01. Available at: http://www.journal.viam.ru (accessed: May 12, 2023). DOI: 10.18577/2713-0193-2021-0-4-3-13.
14. Konovalov V.V., Dubinskiy S.V., Makarov A.D., Dotsenko A.M. Research of correlation dependencies between mechanical properties of aviation materials. Aviacionnye materialy i tehnologii, 2018, no. 2 (51), pp. 40–46. DOI: 10.18577/2071-9140-2018-0-2-40-46.
15. Zamaletdinov I.I. Corrosion and protection of metals. Corrosion of powder materials: textbook. Perm: Perm State Tech. Univ, 2007, pp. 18–19.
16. Kablov E.N., Nikiforov A.A., Demin S.A., Chesnokov D.V., Vinogradov S.S. Promising coatings for corrosion protection of carbon steels. Stal, 2016, no. 6, pp. 70–81.
17. Zakirova L.I., Laptev A.B. Properties of protective electroplating coatings for replacement of cadmium on steel fixing parts (review). Part 1. Morphology and corrosion resistance. Aviaсionnye materialy i tehnologii, 2020, no. 3 (60), pp. 37–46. DOI: 10.18577/2071-9140-2020-0-3-37-46.
18. Kozlov I.A., Leshchev K.A., Nikiforov A.A., Demin S.A. Cold spray coatings (review). Trudy VIAM, 2020, no. 8 (90), paper no. 08. Available at: http://www.viam-works.ru (accessed: May 04, 2023). DOI: 10.18577/2307-6046-2020-0-8-77-93.
19. Abiev R.Sh., Bibik E.E., Vlasov E.A. et al. New reference book of a chemist and technologist. Electrode processes. Chemical kinetics and diffusion. colloidal chemistry. St. Petersburg: Professional, 2004, 838 p.
20. Moridi A., Azadi M., Farrahi G.H. Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects. Surface and Coatings Technology, 2014, vol. 243, pp. 91–99.
21. Richer P., Zúñiga A., Yandouzi M., Jodoin B. CoNiCrAlY microstructural changes induced during cold gas dynamic spraying. Surface and Coatings Technology, 2008, vol. 203, pp. 364–371.
22. Inoue A., Kato A., Zhang T.G.K.S., Masumoto T. Mg–Cu–Y amorphous alloys with high mechanical strengths produced by ametallic mold casting method. Materials Transactions JIM, 1991, vol. 32, pp. 609–616.
23. Сold gas dynamic spraying of high strength copper: рat. US7553385 В2; appl. 23.11.04; publ. 30.01.09.
24. Wang C.-C., Mao Y.-W., Shan Z.-W. et al. Real-time, high-resolution study of nanocrystallization and fatigue cracking in a cyclically strained metallic glass. Proceedings of the National Academy of Sciences of the USA. 2013, pp. 1–6. DOI: 10.1073/pnas.1320235110.
25. List A., Gärtner F., Schmidt T., Klassen T. Impact conditions for cold spraying of hard metallic glasses. Journal of Thermal Spray Technology, 2012, vol. 21, pp. 531–540.
26. Zhang Y.Y., Wu X.K., Cui H., Zhang J.S. Cold-sprayprocessing of a high density nanocrystalline aluminum alloy 2009 coating using a mixture of as-atomized and as-cryomilled powders. Journal of Thermal Spray Technology, 2011, vol. 20, pp. 1125–1132.
27. Novoselova T., Fox P., Morgan R., O’Neill W. Experimental study of titanium/aluminium deposits produced by cold gas dynamic spray. Surface and Coatings Technology, 2006, vol. 200, pp. 2775–2783.
28. Kong L.Y., Shen L., Lu B. et al. Preparation of TiAl3–Al composite coating by cold spray and its high temperature oxidation behavior. Journal of Thermal Spray Technology, 2010, vol. 19, pp. 1206–1210.
29. Lee H., Shin H., Ko K. Effects of gas pressure of cold spray on the formation of Al-based intermetallic compound. Journal of Thermal Spray Technology, 2010, vol. 19, pp. 102–109.
30. Obtaining a single-phase intermetallic alloy based on the aluminum-titanium system: pat. RU 2561952; appl. 27.02.14, publ. 10.09.15.
31. Liang Y., Shi B., Yang X. et al. Microstructure and nano-mechanical property of cold spray Co-base refractory alloy coating. Acta Metall. Sin. (English Letters), 2011, vol. 24, pp. 190–194.
32. King P.C., Zahiri S.H., Jahedi M.Z. Rare earth/metal composite formation by cold spray. Journal of Thermal Spray Technology, 2008, vol. 17, pp. 221–227.
33. Method for obtaining nanostructured functionally graded wear-resistant coatings: pat. 2354749 Rus. Federation; appl. 12.04.07; publ. 10.05.09.
34. Method for producing composite reinforced powder material: pat. RU 2573309; appl. 08.07.14, publ. 20.01.16.
35. Lee H., Shin H., Ko K. Effects of gas pressure of cold spray on the formation of Al-based intermetallic compound. Journal of Thermal Spray Technology, 2010, vol. 19, pp. 102–109.
36. Liang Y., Shi B., Yang X., Zhang J., Meng X. Microstructure and nano-mechanical property of cold spray Co-base refractory alloy coating. Acta Metallurgica Sinica (English Letters), 2011, vol. 24, pp. 190–194.
37. Al-Mangour B., Mongrain R., Irissou E., Yue S. Improving the strength and corrosion resistance of 316L stainless steel for biomedical applications using cold spray. Surface and Coatings Technology, 2013, vol. 216, pp. 297–307.
38. Kang H.-K., Kang S.B. Tungsten/copper composite deposits produced by a cold spray. Scripta Materialia, 2003, vol. 49, pp. 1169–1174.
39. King P.C., Zahiri S.H., Jahedi M.Z. Rare earth/metal composite formation by cold spray. Journal of Thermal Spray Technology, 2008, vol. 17, pp. 221–227.
40. Yang G.-J., Li C.-J., Han F. et al. Low temperature deposition and characterization of TiO2 photocatalytic film through cold spray. Applied Surface Science, 2008, vol. 254, pp. 3979–3982.
41. Bu H., Yandouzi M., Lu C. et al. Cold spray blended Al+Mg 17Al 12 coating for corrosion protection of AZ91D magnesium alloy. Surface and Coatings Technology, 2012, vol. 207, pp. 155–162.
42. Kozlov I.A., Nikiforov A.A., Demin S.A., Vdovin A.I. Use of metal powder composition of the zinc–aluminum system for application of a protective coating by the method of cold gas-dynamic spraying. Trudy VIAM, 2022, no. 6 (112), paper no. 08. Available at: http://www.viam-works.ru (accessed: April 03, 2023). DOI: 10.18577/2307-6046-2022-0-7-89-98.

1. Nurmukhametova A.N., Zenitova L.A. Carbon fiber. Market conditions, demand structure, promising markets for products based on it, areas of application. Butlerovskiye soobshcheniya, 2022, vol. 72, no. 10, pp. 102–130. DOI: 10.37952/ROI-jbc-01/2272-10-102.
2. Kablov E.N. Materials of the new generation – the basis of innovation, technological leadership and national security of Russia. Intellekt i tekhnologii, 2016, no. 2, pp. 16–22.
3. Molchanov B.I., Gudimov M.M. Properties of carbon plastics and their applications. Aviatsionnaya promyshlennost, 1997, no. 3-4, pp. 58–60.
4. Lebedeva O.V., Sipkina E.I. Polymer composites and their properties. Izvestiya vuzov. Prikladnaya khimiya i biotekhnologiya, 2022. Vol. 12. No. 2 (41), pp. 192–207. DOI: 10.21285/2227-2925-2022-12-2-192-207.
5. Kolesnik K.A. Modeling of moisture saturation in polymer composites in real climatic environmental conditions. Aviacionnye materialy i tehnologii, 2017, no. 4 (49), pp. 77–86. DOI: 10.18577/2071-9140-2017-0-4-77-86.
6. Kablov E.N., Laptev A.B., Prokopenko A.N., Gulyaev A.I. Relaxation of polymeric composite materials under the prolonged action of static load and climate (review). Part 1. Binders. Aviation materials and technologies, 2021, no. 4 (65), paper no. 08. Available at: http://www.journal.viam.ru (accessed: December 23, 2022). DOI: 10.18577/2071-9140-2021-0-4-70-80.
7. Donetsky K.I., Karavaev R.Yu., Bystrikova D.V., Mishchun M.I. Properties of carbon fiber reinforced plastic based on a biaxial volume-reinforcing braided preform for the manufacture of elements of tubular structures. Konstruktsii iz kompozitsionnykh materialov, 2022, no. 2 (166), pp. 8–14. DOI: 10/52190/2073-2562_2022_2_8.
8. Mishurov K.S., Mishkin S.I. Environmental effect on properties of CFRP (Carbon Fiber Reinforced Plastic) VKU-39. Trudy VIAM, 2016, no. 12 (48), paper no. 08. Available at: http://www.viam-works.ru (accessed: December 23, 2022). DOI: 10.18577/2307-6046-2016-0-12-8-8.
9. Imametdinov E.Sh., Kondrashov S.V., Gulyaev I.N., Terekhov I.V. Comparative evaluation of the effect of modification with thermoplastic powders on the value of residual compressive strength of carbon fiber. Vse materialy. Entsiklopedicheskiy spravochnik, 2022, no. 7, pp. 22–31.
10. Gulyaev A.I., Yakovlev N.O., Krylov V.D., Lashov O.A. Application of fractographic analysis in the study of interlayer fracture of PCM. Aviaсionnye materialy i tehnologii, 2017, no. 3 (48), pp. 65–73. DOI: 10.18577/2071-9140-2017-0-3-65-73.
11. Semyonova L.V., Nefyodov N.I. Recovery technology for PWC systems with polyurethane enamel for the operating aviation articles after wornout PLC removal. Aviacionnye materialy i tehnologii, 2014, no. S3, pp. 47–50. DOI: 10.18577/2071-9140-2014-0-s3-47-50.
12. Yakovlev N.O., Gulyaev A.I., Lashov O.A. Crack firmness of layered polymeric composite materials (review). Trudy VIAM, 2016, no. 4, paper no. 12. Available at: http://www.viam-works.ru (accessed: December 23, 2022) DOI: 10.185772307-6046-2016-0-4-12-12.
13. Sorokin A.E., Ivanov M.S., Sagomonova V.A. Thermoplastic polymer composite materials based on polyetheretherketones of various manufacturers. Aviation materials and technologies, 2022, no. 1 (66), paper no. 04. Available at: http://www.journal.viam.ru (accessed: December 23, 2022). DOI: 10.18577/2071-9140-2022-0-1-41-50.
14. Gunyaeva A.G., Sidorina A.I., Kurnosov A.O., Klimenko O.N. Polymeric composite materials of new generation on the basis of binder VSE-1212 and the filling agents alternative to ones of Porcher Ind. and Toho Tenax. Aviacionnye materialy i tehnologii, 2018, no. 3 (52), pp. 18–26. DOI: 10.18577/2071-9140-2018-0-3-18-26.
15. Chertishchev V.Yu., Ospennikova O.G., Boichuk A.S., Dikov I.A., Generalov A.S. Determina-tion of the size and depth of defects in multilayer PCM honeycomb structures based on the mechanical impedance value. Aviaсionnye materialy i tehnologii, 2020, no. 3 (60), pp. 72–94. DOI: 10.18577/2071-9140-2020-0-3-72-94.
16. Donetsky K.I., Timoshkov P.N., Safronov A.M. Non-autoclave molding of prepregs. Konstruktsii iz kompozitsionnykh materialov, 2022, no. 1 (165), pp. 29–34. DOI: 10.52190/2073-2562_2022_1_29.
17. Marakhovsky P.S., Vorobyov N.N., Gulyaev A.I., Tkachuk A.I. Influence of polyarylsulfone additives on the climatic resistance of epoxy-based carbon fiber. Vysokomolekulyarnye soyedineniya. Seriya A, 2022, vol. 64, no. 2, pp. 113–119.
18. Strungar E.M., Staroverov O.A., Lunegorova E.M. Comprehensive assessment of the processes of fatigue accumulation of damage and destruction of samples with operational stress concentrators. Diagnostics, Resource and Mechanics of materials and structures, 2022, no 4, pp. 37–49. DOI: 10.17804./2410.-08.2022.4.037.-049.
19. Veligodskiy I.M., Koval T.V., Kurnosov A.O., Marakhovskiy P.S. Study of resistance of glass fiber reinforced plastic to natural weathering in different climatic conditions. Trudy VIAM, 2022, no. 11 (117), paper no. 12. Available at: http://www.viam-works.ru (accessed: December 23, 2022). DOI: 10.18577/2307-6046-2022-0-11-134-148.
20. Salnikov V.G., Startsev O.V., Lebedev M.P., Kopyrin M.M., Vapirov Yu.M. Influence of daily and seasonal changes in relative humidity and temperature on the moisture saturation of carbon fiber in open climatic conditions. Vse materialy. Entsiklopedicheskiy spravochnik, 2022, no. 5, pp. 2–10.
21. Donetskiy K.I., Karavayev R.Yu., Tsybin A.I., Veshkin E.A., Mikhaldykin E.S. Constructional fiberglass plastic for manufacturing of enclosing sheeting elements. Aviacionnyye materialy i tehnologii, 2017, no. 3 (48), pp. 56–64. DOI: 10.18577/2071-9140-2017-0-3-56-64.

1. Kablov E.N., Ospennikova O.G., Svetlov I.L. Highly efficient cooling of GTE hot section blades. Aviacionnye materialy i tehnologii, 2017, no. 2 (47), pp. 3–14. DOI: 10.18577/2071-9140-2017-0-2-3-14.
2. Bondarenko Yu.A. Trends in the development of high-temperature metal materials and technologies in the production of modern aircraft gas turbine engines. Aviacionnye materialy i tehnologii, 2019, no. 2 (55), pp. 3–11. DOI: 10.18577/2071-9140-2019-0-2-3-11.
3. Popovich A.A., Panchenko O.V., Naumov A.A., Sviridov A.V., Skupov A.A., Sbitneva S.V. Friction stir welding of aluminum-lithium alloy V-1469-T. Aviacionnye materialy i tehnologii, 2019, no. 4 (57), pp. 11–17. DOI: 10.18577/2071-9140-2019-0-4-11-17.
4. Min P.G., Vadeev V.E., Kramer V.V. The development of the new VZhM200 superalloy and the technology of its production for casting of the advanced engines’ blades by the directional crystallization. Aviation materials and technologies, 2021, no. 3 (64), paper no. 02. Available at: http://www.journal.viam.ru (accessed: February 11, 2023). DOI: 10.18577/2071-9140-2021-0-3-11-18.
5. Kablov E.N., Chabina E.B., Morozov G.A., Muravskaya N.P. Assessment of compliance of new materials using highlevel CO and MI. Kompetentnost, 2017, no. 2, pp. 40–46.
6. Letov A.F., Karachevtsev F.N. Experience in the development of standard samples of aviation alloys. Mir izmereniy, 2012, no. 8, pp. 31–35.
7. State Standard 8.753–2011. State system for ensuring the uniformity of measurements. Standard materials (substances). Moscow: Standinform, 2011, 19 p.
8. Shavnev A.A., Babashov V.G., Varrik N.M. Continuous fibers based on alumina (review). Aviacionnye materialy i tehnologii, 2020, no. 4 (61), pp. 27–34. DOI: 10.18577/2071-9140-2020-0-4-27-34.
9. Kablov E.N., Morozov G.A., Krutikov V.N., Muravskaya N.P. Certification of standard samples of structure of complex-alloyed alloys using standard. Aviacionnye materialy i tehnologii, 2012, no. 2, pp. 9–11.
10. Handbook of x-ray spectrometry. 2nd ed., rev. and exp. Ed. R.E. Van Grieken, A.A. Marcowicz. New York: Marcel Dekker, Inc., 2001, рр. 14–56.
11. Karachevtsev F.N., Letov A.F., Protsenko O.M., Yakimova M.S. Development of standard samples of the composition of aviation alloys. Standartnyye obraztsy, 2013, no. 4, pp. 30–34.
12. Karachevtsev F.N., Rassokhina L.I., Gerasimov V.V., Visik E.M. Obtaining standard samples for express analysis of heat-resistant nickel alloys. Metallurgiya mashinostroyeniya, 2013, no. 6, pp. 18–19.
13. Parish R.M., Karachevtsev F.N., Zakvzdkina T.N., mechanic E.A. Determination of the chemical composition of highly lifted nickel alloys of aviation purposes by NPES-ISP in combination with microwave sampling. Zavodskaya laboratoriya. Diagnostika materialov, 2013, vol. 79, no. 9, pp. 6–9.
14. Saka T. Glow discharge mass spectrometry. Compendium of Surface and Interface Analysis, 2018, vol. 36, pp. 211–217.
15. Hu J., Wang H. Determination of Trace Elements in Super Alloy by ICP-MS. Mikrochimica Acta, 2001, vol. 137, pp. 149–155.

1. Kablov E.N. New generation materials and digital technologies for their processing. Vestnik Rossiyskoy akademii nauk, 2020, vol. 90, no. 4, pp. 331–334.
2. Kablov E.N., Startsev V.O. Systematical analysis of the climatics influence on mechanical properties of the polymer composite materials based on domestic and foreign sources (review). Aviacionnye materialy i tehnologii, 2018, no. 2 (51), pp. 47–58. DOI: 10.18577/2071-9140-2018-0-2-47-58.
3. Kablov E.N., Laptev A.B., Prokopenko A.N., Gulyaev A.I. Relaxation of polymeric composite materials under the prolonged action of static load and climate (review). Part 1. Binders. Aviation materials and technologies, 2021, no. 4 (65), paper no. 08. Available at: http://www.journal.viam.ru (accessed: March 29, 2023). DOI: 10.18577/2071-9140-2021-0-4-70-80.
4. Webb H., Arnott J., Crawford R., Ivanova E. Plastic degradation and its environment alimplications with special reference to poly(ethylene terephthalate) // Polymers, 2013, vol. 5, pp. 1–18. DOI: 10.3390/polym5010001.
5. Ermishev V.Yu. Metabolic possibilities of bacteria with respect to synthetic hydro-carbons used in the production of non-metallic materials (review). Trudy VIAM, 2023, no. 2 (120), paper no. 11. Available at: http://www.viam-works.ru (accessed: March 24, 2023). DOI: 10.18577/2307-6046-2023-0-2-132-146.
6. Ohtake Y., Kobayashi T., Asabe H. et al. Oxidative degradation and molecular weight change of LDPE buried under bioactive soil for 32–37 years // Journal Applied Polymer Science, 1998, vol. 70, p. 1643–1648. DOI: 10.1002/291097-4622819981128.
7. Yang H., Chen Z.Q., Wang Y. et al. Composition and structure of microbialite ecosystems following the end-Permian mass extinction in South China // Palaeogeography, Palaeoclimatology, Palaeoecology, 2011, vol. 308, pp. 111–128. DOI: 10.1016/j.palaeo.2010.05.029.
8. Laptev A.B., Nikolaev E.V., Kurshev E.V., Goryashnik Yu.S. Features of biodegradation of thermoplastics based on polyesters in different climatic zones. Trudy VIAM, 2019, no. 7 (79), paper no. 10. Available at: http://www.viam-works.ru (accessed: March 15, 2023). DOI: 10.18577/2307-6046-2019-0-7-84-91.
9. Yakovenko T.V., Bukharev G.M., Bobyreva T.V., Pykhtin A.A., Oparina L.A., Parshina L.N. Biocidal additives selection for foamed polyurethanes modification. Trudy VIAM, 2019, no. 7 (79), paper no. 04. Available at: http://www.viam-works.ru (accessed: March 18, 2023). DOI: 10.18577/2307-6046-2019-0-7-34-41.
10. ASTM D4939-89. Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater, 2020. Available at: https://www.astm.org/d4939-89r20 (accessed: April 10, 2023). DOI: 10.1520/D4939-89R20.
11. State Standard 9.803–88. A unified system of protection against corrosion and aging. Fungicides. Method for determining effectiveness. Moscow: Publishing House of Standards, 1998, 28 p.
12. ASTM E2111-12. Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals, 2018. Available at: https://www.astm.org/E2111-12r18 (accessed: April 10, 2023). DOI: 10.1520/E2111-12R18.
13. ASTM E2783-11. Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure. Test method, 2016. Available at: https://www.astm.org/E2783-11r16 (accessed: April 10, 2023). DOI: 10.1520/E2783-11R16.
14. ASTM E645-13. Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems, 2018. Available at: https://www.astm.org/E645-13 (accessed: April 10, 2023). DOI: 10.1520/E0645-13.
15. State Standard 9.050–75. A unified system of protection against corrosion and aging. Lacoclance coatings. Methods of laboratory tests on resistance to molds. Moscow: Publishing house of standards, 1976, 5 p.
16. State Standard 9.058–75. A unified system of protection against corrosion and aging. The materials are polymer, wood, fabric, paper, cardboard. Testing methods for resistance to termite damage. Moscow: Publishing house of standards, 1976, 9 p.
17. ASTM D5588-97. Standard Test Method for Determination of the Microbial Condition of Paint, Paint Raw Materials, and Plant Areas, 2021. Available at: https://www.astm.org/D5588-97r21 (accessed: April 10, 2023). DOI: 10.1520/D5588-97R21.
18. ASTM D5590-00. Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate. Available at: https://www.astm.org/ D5590-00 (accessed: April 10, 2023). DOI: 10.1520/D5590-00.
19. State Standard 9.060–75. A unified system of protection against corrosion and aging. Fabrics. The method of laboratory tests for resistance to microbiological destruction. Moscow: Publishing House of Standards, 1977, 10 p.
20. ISO 17556-2012. Plastics – Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolve, 2019. Available at: https://www.iso.org/standard/56089 (accessed: April 10, 2023).
21. State Standard 9.085–78. A unified system of protection against corrosion and aging. Lubents lubricants. Testing methods for bio resistance. Moscow: Publishing House of Standards, 1978, 5 p.
22. State Standard 9.023–74. A unified system of protection against corrosion and aging. Oil fuels. The method of laboratory tests of bio resistance of fuels protected by antimicrobial additives. Moscow: Publishing house of standards, 1975, 5 p.
23. ASTM E1259-16. Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390 °C, 2018. Available at: https://www.astm.org/E1259-16 (accessed: April 10, 2023). DOI: 10.1520/E1259-16.
24. State Standard 9.049–91. A unified system of protection against corrosion and aging. The materials are polymer and their components. Methods of laboratory tests on resistance to mold mushrooms. Moscow: Publishing house of standards, 1991, 13 p.
25. ASTM C1338-08. Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings, 2014. Available at: https://www.astm.org/C1338-08 (accessed: April 10, 2023). DOI: 10.1520/C1338-08.
26. ASTM G21-15. Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi, 2021. Available at: https://www.astm.org/G21-15e01 (accessed: April 10, 2023). DOI: 10.1520/G0021-15R21E01.
27. ASTM D4783-01. Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi, 2021. DOI: 10.1520/D4783-01R21.
28. Lucas N., Bienaime C., Belloy C. et al. Polymer biodegradation: mechanisms and estimation techniques // Chemosphere, 2008, no. 4, p. 429. DOI: 10.1016/j.chemosphere.2008.06.064.
29. Suvorova A.I., Tyukova I.S. Biodegradable systems: thermodynamics, rheological properties and biocation // Vysokomolekulyarnye soyedineniya, 2008, vol. 50, no. 7, pp. 1162–1171.
30. ASTM D5338-15. Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, 2021. Available at: https://www.astm.org/D5338-15r21 (accessed: April 10, 2023). DOI: 10.1520/D5338-15R21.
31. ASTM D5509-96. Standard Practice for Exposing Plastics to a Simulated Compost Environment. Available at: https://www.astm.org/ D5509-96 (accessed: April 10, 2023).
32. Averina A.E., Nikolaev E.V. The use of the method of radioactive indicators to study the mechanisms of structural changes in polymeric materials // Climate 2018: issues of forecasting corrosion, aging and biopersion of materials: Materials III All-Rus. Sci.-tech. Conf. (Gelendzhik, July 19–20, 2018). Moscow: VIAM, 2018, pp. 7–21.
33. Voges R., Heys J.R., Moenius T. Preparation of compounds labeled with tritium and carbon-14. Wiley, 2009, pp. 682.
34. Ledderose C., Bao Y., Zhang J., Junger W.G. Novel method for real-time monitoring of ATP release reveals multiple phases of autocrine purinergic signalling during immune cell activation // Acta Physiologica, 2015, vol. 213, pp. 334–345. DOI: 10.1111/apha.12435.
35. Cho M.H., Niles A., Huang R. et al. A bioluminescent cytotoxicity assay for assessment of membrane integrity using a proteolytic biomarker // Toxicology in Vitro, 2008, vol. 22, pp. 1099–1106. DOI: 10.1016/j.tiv.2008.02.013.
36. Moravec R.A., O’Brien M.A., Daily W.J. et al. Cell-based bioluminescent assays for all three proteasome activities in a homogeneous format // Analytical Biochemistry, 2009, vol. 387, pp. 294–302. DOI: 10.1016/j.ab.2009.01.016.
37. Zhang T., Herbert F. Application of real-time polymerase chain reaction for quantification of microorganisms in environmental samples // Applied microbiology and biotechnology, 2006, vol. 70, pp. 281–289. DOI: 10.1007/s00253-006-0333-6.
38. Zislis T., Mark D.E., Cerbas E.L., Hollinger J.O. Scanning electron microscopic study of cell attachment to biodegradable polymer implants // Journal Oral Implantology, 1989, vol. 15, pp. 160–167.
39. Funabashi M., Ninomiya F., Kunioka M. Biodegradation of Polycaprolactone Powders Proposed as Reference Test Materials for International Standard of Biodegradation Evaluation Method // Journal of polymers and the environment, 2007, vol. 15, pp. 7–17. DOI: 10.1007/s10924-006-0041-4.